Features

■ Low cost, high performance, small size

■ 4.3 inch TFT LCD Display

■ Soft power switch

■ Selectable Chinese-English operation language

■ Max. 100kHz test frequency

■ Max. 6 digit reading resolution

■ 10mVrms-2.0Vrms programmable signal level, built-in 0 - ± 5V/50mA bias source

■ DCR, 50mV-2V programmable test level, resolution 10μΩ

■ Ls-Rd / Lp-Rd Function (L, Rd display simultaneously) *

■ Highest test speed 13ms/time

■ Selectable 30Ω/100Ω signal source impedance 

■ V/I monitor and auto level adjustment function

■ Built-in comparator, 10 bins sorting and count function

■ File storage and firmware update through U disk

■ RS232, RS485, USB, HANDLER, GPIB interface

Brief Introduction

■ Adopting the latest technology & high density circuit design and concentrating the essence of LCR test, TH283X series is a new generation compact LCR meter of low cost and high performance. Instead of traditional mechanical power switch, it adopts software control power switch. The basic accuracy of 0.05% and good test stability can compare favourably with those high-end models. Being equipped with 4.3 inch TFT LCD Display and brand new interface system, TH283X series LCR meters possess elegant appearance and easy operation.

Also, being provided with various interfaces and good compatibility with SCPI commands, TH283X series LCR meters are convenient for constituting all kinds of test system and satisfy various kinds of demands for inspection, production and scientific research.

Specifications

Model		TH2830	TH2832
Display		4.3 TFT LCD Display 480×272
Basic  accuracy	LCRZ	0.05%	0.05%
	DCR	0.10%
Test frequency		50Hz-100kHz, Continuous	20Hz-200kHz, Continuous
AC Singal		10mVrms - 2Vrms; 100μArms - 20mArms
Output impedance		30Ω, 100Ω
RDC Signal level		1V	5mV - 2V
DC Bias		-------	0V - ± 5V/0mA - ± 50mA
Test parameters		L, C, R, |Z|, D, Q, |Y|, G, X,  θd, θr, RDC, Vm, Im，△%
Test Speed (ms)		Fast: 12.5ms; Middle: 83 ms; Slow: 167 ms
List Sweep		201 Dots. Parameter: Frequency, AC Voltage, AC Current, DC BIAS Voltage, DC BIAS Current
Test Result Display		Measurement display 1: test status and results; measurement display 2: sorting status and results
General Function		Series, parallel equivalent mode, test cable length: 0, 1m, average: 1-255 times, calibration: open circuit, short circuit, load, ALC function(only TH2832) Range selection: automatic, manual, trigger mode: INT, MAN, EXT, BUS, trigger delay: 0-999s, keyboard lock function
Special function		L-RDC simultaneous test, soft power switch, one-key screenshot function, data recording function
Comparator function		10 bins, BIN1–BIN9, NG, AUX Bin count function PASS, FAIL LED display on front panel
Storage	Internal	100 LCRZ instrument setting files, 201 times test results
	USB External	Instrument setting files , measurement result CSV files, printed screen (GIF format)

 

Accessary

Standard
Accessories name	Model
Fixture	TH26048A
Short circuit	TH26010
Kelvin test lead with box four-terminal insulation and lock	TH26011CS